Maintenance of rice transplanter before storage

September 27, 2021

After the transplanting is completed and the rice transplanter is not used for a long period of time, the maintenance of the machine is very important for extending the service life of the rice transplanter and maintaining the good state of the rice transplanter. First, clean the soil on the rice transplanter. Second, the full oil injection at each oil filling place. Third, replace the transplanter main gear box and other oil, the new engine oil replacement in the heat after the end of the operation as well, the other parts and other oil seal rust. 4. Put all the fuel in the fuel tank, fuel filter and carburetor clean. 5. To prevent rust on the cylinder wall and valves, remove the spark plug and add 10 ml of oil from the spark plug hole. After repeatedly pulling the recoil starter several times, install the spark plug. Pull the recoil starter to a position with compression to stop. 6. Drop the transplanting part and grease the planting parts to prevent rust. 7. In order to prolong the life of the pressing spring of the planting arm, the planting fork should be kept at the lowest position. 8. The clutch handle of the main clutch and the arm of the planting arm are “disconnected”, the hydraulic handle is “down”, and the fuel cock is stored under the “OFF” state. Nine, remove the battery, after charging, dry place maintenance. 10. After cleaning the rice transplanter, cover it with a cover cloth and store it in a place where there is no dust, less moisture, direct sunlight, and dryness and ventilation. Prevent contact with fertilizers, pesticides, etc.; check parts and tools, and store them with a rice transplanter.

New Energy

The main use of LiPF6 is in commercial secondary batteries, an application that exploits its high solubility in non aqueous, polar solvents. Specifically, solutions of lithium hexafluorophosphate in carbonate blends of ethylene carbonate, dimethyl carbonate, diethyl carbonate and/or ethyl methyl carbonate, with a small amount of one or many additives such as fluoroethylene carbonate and vinylene carbonate, serve as state-of-the-art electrolytes in lithium-ion batteries.[6][7] This application also exploits the inertness of the hexafluorophosphate anion toward strong reducing agents, such as lithium metal.

Lithium Hexafluorophosphate

Chengdu Jingke Trading Co., Ltd. , https://www.jkherb.com