Causes of abnormal tire wear

February 13, 2020

Tire wear is mainly caused by the friction generated by the sliding between the tire and the ground. If the tire is improperly used or positioned incorrectly, it will cause abnormal wear and tear. Common abnormal wear is as follows:

1, the early wear of the middle of the tire: The main reason is that the air volume is too large. Appropriately increasing the inflation volume of the tire can reduce the rolling resistance of the tire and save fuel. However, when the aeration rate is too large, not only does it affect the damping performance of the tire, but it also causes the tire deformation to be excessive, and the contact area with the ground is reduced. Normal wear can only be borne by the middle of the tread, resulting in early wear. If a wide tire is used on a narrow rim, it will also cause early wear in the middle.

2, excessive wear on both sides of the tire: The main reason is that the amount of inflation is not enough, or long-term overload driving. When the aeration is small or the load is heavy, the contact surface between the tire and the ground is large, so that the two sides of the tire come into contact with the ground to participate in work and form early wear.

3. Excessive wear on one side of the tire: The main reason is tire misalignment. When the camber angle is too large, early wear on the outside of the tire occurs, and when the camber angle is too small or absent, the inner edge of the tire forms early wear.

Poly Gamma Glutamic Acid is a natural occurring, multi-functional, and biodegradable biopolymer. Agricultural Grade Poly-Γ-Glutamic Acid is produced through fermentation by Bacillus subtilis using glutamic acid. Poly Gamma Glutamic Acid is consists of glutamic acid monomers cross-linked between α-amino and γ-carboxyl groups, and the molecular weight of PGA is usually between 100~1000 kDa. It is water-soluble, edible and non-toxictowards human, and is environment friendly. It has broad applications in the fields of medicine, food, cosmetics, and water treatment.


Applications

*Base Fertilizer:

Use it about 10kgs for a unit of area, then irrigate with clean water or muck water. Or irrigate amino acid together with water. Or fertilize with other compound fertilizers, broadcast application, hole application both are ok. It is applicable to all the crops.

*Foliar Fertilizer:

Dilute it by 800-1000 times and spray directly. Also, it can spray by mixed with trace element. Use 200-500g for a unit of area.

*Compound Fertilizer & Irrigation Fertilizer:

It can be added to compound fertilizer by rate of 5-8%, improve the nutrient content of compound fertilizer, increases crops` direct absorption.

 

Advantage For Fertilizer Gamma-PGA

1.Easy and high-efficacy absorption by plants.

2.Help the absorption and the translocation of the nutrients in cells.

3.Improves the immune system of the crops and increases their resistance against diseases, severe weather.

4.Simulates protein synthesis and gives strength to plants accelerating their growth

 

Agricultural Grade Poly-γ-glutamic Acid

Poly Gamma Glutamic Acid,Agricultural Grade Poly-Γ-Glutamic Acid,Agricultural Grade Poly Glutamic Acid,Agricultural Grade Acid

Qufu Hi-Tech Trading Co., Ltd. , https://www.chinahyaluronic-acid.com